Click image to view full sizeItem-Name:
Specification:
BarySkin® V60
Specification:BarySkin® V60 is a solvent-free two-component (2K) system based on polyurethane.
More-Details:
Main function
Structure-borne sound insulation (anti-drumming), corrosion protection, sealant, adhesive
Applications
Sound insulation cabins, vehicle cabs, mechanical engineering, partition walls, electrical apparatus construction, enclosures, sandwich structures, ship- and yacht building etc.
Processing
Attention should be paid to our processing instructions!
Underground preparation
Good adhesion to normal primers. The underground has to be clean, dry and free from grease and oil.
Steel and metal: sandblast SA 2 ½ or grinding C - St2 according to SIS-norm.
Gel coat: Grinding with sand-paper, granulation 60 to 80, crosswise.
Processing temperature
Between +5 °C and +35 °C
Processing
Exact mixing ratio is important!
Hand-processing (cup-processing) intensive mixing of wall-zones, probably transfer to second cup. Stir well component A before use. A layer wise filling of cups is possible, unmixed material does not harden! Keep away moisture during hardening time.
Spraying: start into bucket
Potlife/ interval time
(Approximate) 30 min / 7 days
Revision
The revision with an adhesion mediator (primer) as well as grinding and roughening up are possible.
Storage conditions
Dry between 15 - 20 °C. Protect against frost and blazing sun!
Max. storage time: 12 months in unopened original package
Delivery forms
The material is available in bundles separately from 7 kg of total quantity, components A and B in the correct mixing proportion packaged.
More Products
Sonit® Alu/Butyl
Main functionSound deadening of sheets, in particular of altered partsApplicationsCar body and vehicle construction, household equipment, ship building, mechanical engineering, air ducts etc. The material can be applied to oiled (white corrosion protection oil) surfaces without prior cleaning and withstands standard degreasing and painting processes.ProcessingThe surface must be carefully cleaned from dust, grease and water. Full area adhesion has to be insured. The adhesion strength is directly dependent from the processing pressure. The material has to be pressed in firmly, e.g. using a feed roll.Cold bonding should not take place under 20 °C material temperature.Storage conditionsDry at temperatures between 18 - 35 °C Stackability: max. 100 partsMax. storage time: 3 monthsDelivery formsStandard boards ca. 1000 x 1030 mm, other sizes and cut-to-size pieces upon requestReliabilityThe product is not subject to labeling by EC directives / Ordinance on Hazardous Substances
Gerkotekt K
Main functionStructure-borne sound insulation between solid components and joints, impact sound and heat insulation at floating screed and under flaggings, sound decoupling of wood and solid componentsTiling and boards can be laid in the mortar bed with no levelling layer directly on Gerkotekt K.CharacteristicGerkotekt B absorbs compressive and tensile strength between the underground and coating. Blistering occur with pressure (gases, air, water vapor) is largely prevented by the porous structure.ResistanceGerkotekt K is resistant against normal building moisture, fungal attacks and weathering. At continuous humidity from below before the laying of Gerkotekt B must applied the usual moisture barriers eg bituminous primers, hot glued insulating board.Storage conditionsDry at temperatures between 18 - 35 °C Max. storage time: 12 monthsDelivery formsStandard boards 1000 x 1000 mm, roll size available in 1000 mm, roll length 10 meters, stripes in various widths, as well as cuts on request.
Gerkotekt B
Main functionAirborne sound absorption (absorption), structure-borne sound insulation (anti-drumming), metal sound deadening and airborne sound insulation as impact sound and heat insulation, interlayer between components and breathable wind protection of thermal insulation CharacteristicGerkotekt B absorbs compressive and tensile strength between the underground and coating. Blistering occur with pressure (gases, air, water vapor) is largely prevented by the porous structure.OptionsSelf-adhesive equipment available on requestResistanceGerkotekt B is resistant against normal building moisture and fungal attack. At continuous humidity from below before the laying of Gerkotekt B must applied the usual moisture barriers eg bituminous primers, hot glued insulating board.Storage conditionsDry at temperatures between 18 - 35 °C Max. storage time: 12 monthsDelivery formsStandard boards 1000 x 1000 mm, roll size available in 1000 mm, roll length 10 meters, stripes in various widths, as well as cuts on request.
Damping foil X3
Main functionStructure-borne sound insulation (anti-drumming)ApplicationsSound insulation cabins, vehicle cabins, mechanical engineering, partition walls, electrical apparatus construction, enclosures, sandwich structures, ship- and yacht building etc.ProcessingThe surface must be carefully cleaned from dust, grease, oil and water. Full area adhesion has to be insured. The adhesion strength is directly dependent from the processing pressure. The material has to be pressed in firmly, e.g. using a feed roll.Processing temperature: 18 - 25 °CStorage conditionsDry at temperatures between 18 - 35 °C Max. storage time: 6 monthsDelivery formsStandard boards 1000 x 1000 mm, other sizes and cut-to-size pieces upon request
Sonit® KM S
Main functionAirborne sound insulation and structure-borne sound insulation (anti-drumming)ApplicationsBody- and vehicle construction, home appliances, shipbuilding, mechanical engineering, partition walls, air ducts, sound damping doors, sound isolation etc.ProcessingThe surface must be carefully cleaned from dust, grease, oil and water. Full area adhesion has to be insured. The adhesion strength is directly dependent from the processing pressure. The material has to be pressed in firmly, e.g. using a feed roll.Cold adhesions should not be occurred below 20 °C material temperature.OptionsSurface colour silverStorage conditionsDry at temperatures between 18 - 35 °C Max. storage time: 3 monthsDelivery formsStandard boards 1000 x 1000 mm, other sizes and cut-to-size pieces upon request
Sonit® BS
Main functionAirborne sound insulation and structure-borne sound insulation (anti-drumming)ApplicationsVehicle and body constructions, household appliances, ship building, mechanical engineering, partition walls, air ducts, soundproofing doors, noise damper etc.ProcessingThe surface must be carefully cleaned from dust, grease, oil and water. Full area adhesion has to be insured. The adhesion strength is directly dependent from the processing pressure. The material has to be pressed in firmly, e.g. using a feed roll. Cold adhesions should not be occurred below 20 ° C material temperature.Storage conditionsDry at temperatures between 18 - 35 °C Max. storage time: 3 monthsDelivery formsStandard boards 1000 x 1000 mm, other sizes and cut-to-size pieces upon request
BarySkin® V608D
Main FunctionStructure borne sound dampening (anti-drumming), corrosion protection, sealing, adhesiveApplicationsThick-walled, steel constructionsProcessingAttention should be paid to our processing instructions!Underground preparationGood adhesion to normal primers. The underground has to be clean, dry and free from grease and oil.Steel and metal: sandblast SA 2 ½ or grinding C - St2 according to SIS-norm. Gel coat: Grinding with sand-paper, granulation 60 to 80, crosswise.Processing temperatureBetween +5 °C and +35 °CProcessingExact mixing ratio is important! Hand-processing (cup-processing) intensive mixing of wall-zones, probably transfer to second cup. Stir well component A before use. A layer wise filling of cups is possible, unmixed material does not harden! Keep away moisture during hardening time. putty processingPotlife/ Interval time(Approximate) 30 min / 7 daysRevisionThe revision with an adhesion mediator (primer) as well as grinding and roughening up are possible.Storage conditionsDry between 15 - 20 °C. Protect against frost and blazing sun!Max. storage time: 12 months in unopened original packageDelivery formsThe material is available in bundles separately from 10 kg of total quantity, components A and B in the correct mixing proportion packaged.
BarySkin® V61 white special
Main functionStructure-borne sound insulation (anti-drumming), corrosion protectionApplicationsVehicle cabs, mechanical engineering, partition walls, electrical apparatus construction, enclosures, sandwich structures, ship- and yacht building, internal coating of drinking water reservoirs and tanks etc.ProcessingAttention should be paid to our processing instructions!Underground preparationGood adhesion to normal primers. The underground has to be clean, dry and free from grease and oil.Steel and metal: sandblast SA 2 ½ or grinding C - St2 according to SIS-norm. Gel coat: Grinding with sand-paper, granulation 60 to 80, crosswise.Processing temperatureBetween +5 °C and +35 °CProcessingExact mixing ratio is important! Hand-processing (cup-processing) intensive mixing of wall-zones, probably transfer to second cup. Stir well component A before use. A layer wise filling of cups is possible, unmixed material does not harden! Keep away moisture during hardening time. Spraying: start into bucketPotlife/ interval time(Approximate) 30 min / 7 daysRevisionThe revision with an adhesion mediator (primer) as well as grinding and roughening up are possible.Storage conditionsDry between 15 - 20 °C. Protect against frost and blazing sun!Max. storage time: 12 months in unopened original packageDelivery formsThe material is available in bundles separately from 7 kg of total quantity, components A and B in the correct mixing proportion packaged.
