Click image to view full sizeItem-Name:
Specification:
M 1019
Specification:M 1019 is a heavy foil based on bitumen, both sides laminated with glass fiber mats. The surface is covered with an imprinted aluminum foil. Self-adhesive equipment with a high-quality adhesive system based on acrylate.
More-Details:
Main function
Airborne sound insulation, especially in conjunction with radiation heat
Applications
Mechanical engineering, plant construction, engine compartment.
Processing
The surface must be carefully cleaned from dust, grease, oil and water.
Full area adhesion has to be insured. The adhesion strength is directly dependent from the processing pressure. The material has to be pressed in firmly, e.g. using a feed roll.
Processing temperature: 18 - 25 °C
Storage conditions
Dry at temperatures between 18 - 35 °C
Max. storage time: 6 months
Delivery forms
Standard boards 1000 x 1600 mm, other sizes and cut-to-size pieces upon request
Airborne sound insulation, especially in conjunction with radiation heat
Applications
Mechanical engineering, plant construction, engine compartment.
Processing
The surface must be carefully cleaned from dust, grease, oil and water.
Full area adhesion has to be insured. The adhesion strength is directly dependent from the processing pressure. The material has to be pressed in firmly, e.g. using a feed roll.
Processing temperature: 18 - 25 °C
Storage conditions
Dry at temperatures between 18 - 35 °C
Max. storage time: 6 months
Delivery forms
Standard boards 1000 x 1600 mm, other sizes and cut-to-size pieces upon request
More Products
Sonit® BS
Main functionAirborne sound insulation and structure-borne sound insulation (anti-drumming)ApplicationsVehicle and body constructions, household appliances, ship building, mechanical engineering, partition walls, air ducts, soundproofing doors, noise damper etc.ProcessingThe surface must be carefully cleaned from dust, grease, oil and water. Full area adhesion has to be insured. The adhesion strength is directly dependent from the processing pressure. The material has to be pressed in firmly, e.g. using a feed roll. Cold adhesions should not be occurred below 20 ° C material temperature.Storage conditionsDry at temperatures between 18 - 35 °C Max. storage time: 3 monthsDelivery formsStandard boards 1000 x 1000 mm, other sizes and cut-to-size pieces upon request
Bary-X2®/-a
Main functionAirborne sound insulationApplicationsSound insulating cabins, vehicles cabins, mechanical engineering, partition wall, electrically machine-construction, encapsulation, sandwich constructions, ship- and yacht building etc. ProcessingMechanical attachmentSticking together with BarySkin® V60 (2K-adhesive, 1 kg/m²)Processing temperature: 18 - 25 °CThe material is not equipped self-adhesive. We point out that has to be paid attention at the adhesion of the material, e.g. with BarySkin®, that the plates are mechanical to holders after the assembly up to the tempering of the adhesive/the sticking mass.Storage conditionsDry at temperatures between 18 - 35 °C Max. storage time: 6 monthsDelivery formsStandard boards 1000 x 1000 mm, other sizes and cut-to-size pieces upon request
Sonit® KM S
Main functionAirborne sound insulation and structure-borne sound insulation (anti-drumming)ApplicationsBody- and vehicle construction, home appliances, shipbuilding, mechanical engineering, partition walls, air ducts, sound damping doors, sound isolation etc.ProcessingThe surface must be carefully cleaned from dust, grease, oil and water. Full area adhesion has to be insured. The adhesion strength is directly dependent from the processing pressure. The material has to be pressed in firmly, e.g. using a feed roll.Cold adhesions should not be occurred below 20 °C material temperature.OptionsSurface colour silverStorage conditionsDry at temperatures between 18 - 35 °C Max. storage time: 3 monthsDelivery formsStandard boards 1000 x 1000 mm, other sizes and cut-to-size pieces upon request
S 3307/2.1-10
Main functionAirborne sound absorption (absorption) and airborne sound insulation ApplicationsSound insulating cabins, vehicle cabs, mechanical engineering etc. ProcessingThe surface must be carefully cleaned from dust, grease, oil and water. Full area adhesion has to be insured. The adhesion strength is directly dependent from the processing pressure. The material has to be pressed in firmly, e.g. using a feed roll. Processing temperature: 18 - 25 °CSpecialsThe surface is resistant to penetration and solubilization of / by oil, gasoline, diesel, waterStorage conditionsDry at temperatures between 18 - 35 °C Max. storage time: 6 monthsDelivery formsStandard boards 1000 x 1000 mm, other sizes and cut-to-size pieces upon request
S 3305a/4.5
Main functionAirborne sound insulationApplicationsFloor mats in vehicles, cabinsProcessingMechanical attachmentProcessing temperature: 18 - 25 °CStorage conditionsDry at temperatures between 18 - 35 °CMax. storage time: unlimitedDelivery formStandard boards 1000 x 1600 mm, other sizes and cut-to-size pieces upon request
S 3302a
Main functionAirborne sound insulation, heat insulationApplicationsFloor mats in vehicles, cabinsProcessingMechanical attachmentProcessing temperature: 18 - 25 °CStorage conditionsDry at temperatures between 18 - 35 °CMax. storage time: unlimitedDelivery formStandard boards 1000 x 1600 mm, other sizes and cut-to-size pieces upon request
S 3300/2.1-10-L/SW
Main functionAirborne sound insulationApplicationsVehicle cabs, sound capsules, mechanical engineering, interior paneling etc. ProcessingThe surface must be carefully cleaned from dust, grease, oil and water. Full area adhesion has to be insured. The adhesion strength is directly dependent from the processing pressure. The material has to be pressed in firmly, e.g. using a feed roll. Processing temperature: 18 - 25 °CStorage conditionsDry at temperatures between 18 - 35 °C Max. storage time: 6 monthsDelivery formsStandard boards 1000 x 1600 mm, other sizes and cut-to-size pieces upon request
M 1721
Main functionStructure-borne sound insulation (anti-drumming) and airborne sound insulation ApplicationsMechanical engineering, plant construction, sound insulation cabins, vehicle cabs etc.ProcessingThe surface must be carefully cleaned from dust, grease, oil and water. Full area adhesion has to be insured. The adhesion strength is directly dependent from the processing pressure. The material has to be pressed in firmly, e.g. using a feed roll. Processing temperature: 18 - 25 °CStorage conditionsDry at temperatures between 18 - 35 °C Max. storage time: 6 monthsDelivery formsStandard boards 1000 x 1600 mm, other sizes and cut-to-size pieces upon request
